Accredited Testing & Calibration

GT Instrument  Sdn Bhd was initially involved with the supply/sales of test equipment & specialized machinery and  after sales technical support that includes commissioning, services , maintenance and calibration.  As part of our continual improvement and value added services to the industries, in year 2000, we embarked on getting our calibration services accredited to ISO 17025.  We have since expanded our accredited calibration services and our current scope of is as listed below. [Download: Scope of Accreditation]

To further enhance our services to the industries, we have added testing as our new ISO 17025 accredited services. Our accredited testing services includes mechanical test for rubber, plastics and composite materials.

Field of Calibration : Force Field

Instrument Calibrated /
Measurement Parameter
Range Remarks
Tension / Compression Testing Machine

(a) Compression mode
0 N to 500 N
0.5 kN to 5 kN
5 kN to 50 kN
10 kN to 100 kN
50 kN to 500 kN
100 kN to 1000 kN
300 kN to 3000 kN
With reference to
ISO 7500 - 1:2018

ASTM E4:2021

(b) Tension load
(Standard Weight)

(Load Cell)
0 kg to 20 kg

0 N to 500 N
0.5 kN to 5 kN
5 kN to 50 kN
10 kN to 100 kN
With reference to
ISO 7500 - 1:2018

ASTM E4:2021
Displacement 0 mm to 500 mm ASTM E2309:2020
Speed Up to 500 mm/min ASTM E2658:2015
Extensometer (Contact type only) 0 mm to 5 mm
5 mm to 25 mm
25 mm to 50 mm
Based on
ASTM E83-16
ISO 9513:2012
Long Travel Extensometer
(Contact Type Only)
0 mm to 500mm Based on
ASTM E83-16
ISO 9513:2012
Charpy Impact Tester  1 Jule to 500 Joule
ASTM E23-18
ISO 148-2:2016
Linear Dimension
0 mm to 180 mm
0 mm to 75 mm
ISO 16012:2015
IEC 60811-1:2001
Angular Dimension 0° - 90°
ISO 16012:2015
IEC 60811-1:2001
Circular Dimension

a) Diameter
0 mm to 75 mm
ISO 16012:2015
IEC 60811-1:2001
b) Radius 0 mm to 75 mm
ISO 16012:2015
IEC 60811-1:2001

**NOTE: We are able to provide class of machine range as per ISO 7500-1:2018.


Scope of Testing : Mechanical

Materials / Products Tested Type of Test / Properties Measured / Range of Measurement Standard Test Methods / Equipment / Techniques
Rubber & Rubber Products Tensile Properties (Test Method) ISO 37 : 2017
ASTM D412-16 (2021)
Tensile Properties (Specification - Gloves) EN 455-2 : 2015
ISO 11193-1 : 2020
ISO 10282 : 2014
ASTM D3578-19
ASTM D6319-19
ASTM D4679 : 02 (2015)
ASTM D3577-19
Accelerated Aging and Heat Resistance Test ISO 188 : 2011
Plastics and Plastics Composite Tensile Strength, Yield Strength and Elongation at Break ISO 527-1 : 2019
ASTM D638 : 2014
ISO 527-2 : 2012
Flexural Strength, Flexural Modulus ASTM D790 : 2017
ISO 178 : 2019
Property Type I,II

 

Switch To Desktop Version